T
0800 169 5151

STORMOR Mono, Duo, Solo Accessories

STORMOR Mono, Duo, Solo Accessories

Stormor is a versatile and adaptable range of metal shelving which has a wide range of suitable accessories all designed to help enhance the storage capabilities of the Stormor Mono, Duo and Solo range. The entire accessories range is interchangeable between the three frame types and includes:

  • 1 – Solo Frame
    Single piece solid frame which features a 20mm delta profile front post with a T-section rear. Frame is pierced with slots on 25mm pitch t accommodate shelf clips.
  • 2 – Mono Frame
    Open shelving frame consisting of a pair of 20mm wide uprights connected horizontally by bracing panels. Available with painted finish as standard or pre-galvanised.
  • 3 – Duo Frame
    Double skinned 20mm box section frame. Allows clear access to the full shelf width, eliminating ‘snagging’ of items stored. Complies with clear access requirements of PD5454.
  • 4 – Cross Brace
    Provides essential stability bracing for open back shelving bays.
  • 5 – Rear Cladding
    Solid steel sheets that enclose the rear of the bay and give essential stability to the bay structure.
  • 6 – Mesh Cladding
    Can be fitted to open frames and as rear cladding for all frame types. Retains visibility and ventilation for the items stored.
  • 7 – Open Section Shelf
    25mm section shelf with a formed open flange which allows lateral files to be hung underneath the shelf. Fits all frames plus Euro Shelving frames.
  • 8 – Box Section Shelf
    25mm box section shelf with formed flange on the front and back for greater load bearing strength. Fits all frames plus Euro Shelving frames.
  • 9- Document Divider
    Slim profile ‘clip-in’ divider designed specifically to be used with document storage ensuring minimal wasted space on the shelf.
  • 10 – General Purpose Divider
    Used to divide shelves horizontally into smaller storage compartments. The ‘clip-in’ divider is easily re-positioned and has a reinforced front edge.
  • 11 – Under-shelf Divider
    Divider simply clips in under the shelf to support books, files etc. Divider can be repositioned as required. For use with open shelves only.
  • 12 – Part Height Dividers
    150mm high divider which slots into either the top or bottom of a shelf to provide storage compartments or support for files or taller material.
  • 13 – Back Stop
    Zinc plated rod which fits across the rear of bays to prevent items falling off the back of a shelf or to segregate a joining shelves. Simply slots into the upright.
  • 14 – Pull-out Drawer
    Fitted onto telescopic slides the pull-out drawer is available in 3 standard heights. Ideal for the storage of CD’s, media and other small items within a shelving bay.
  • 15 – Pull-out Filing Cradle
    Can accommodate A4 and foolscap top loaded suspension files. Cradle slides out on telescopic slides.
  • 16 – Pull-out Reference Shelf
    Slides out from the bay on telescopic slides. Provides a flat and stable work surface within a storage bay. Fits all frame types.
  • 17 – Frame Floor Clip
    Simple clip-in bracket which allows all types of Stormor frames to be floor fixed. Can be shimmed by using Stormor shim plates. Fits within bay footprint.
  • 18 – Floor Plinth
    Floor plinths prevent dust and debris collecting under the shelving. Simply clips to the underside of shelf to create a smooth overall finish of the front face.
  • 19 – Half Height Door
    Hinged door 1100mm high.  Creates a secure storage cupboard within the shelving.  Doors are stiffened to the full height and have 3-point locking, recessed handle and safety key.
  • 20 – Full Height Door
    Hinged doors transform shelving into a lockable storage cupboard. Doors feature full height vertical stiffener, 3-point locking recessed handle and safety key.
  • 21 – Tambour Door
    Roller shutter doors for security and dust protection of items stored. Open door does not protrude into aisle making tambours ideal for lockable storage in limited space.
  • 22 – Plastic Drawers
    Ideal for the storage of small items. Available in 3 sizes, the drawers tilt on integrated back-stops to allow easy viewing and access and can be sub-divided.
  • 23 – Bin Fronts
    Prevent items falling off the front of shelves and when used with shelf dividers form enclosed compartments or ‘bins’.
  • 24 – Garment Hanging
    System of rails and brackets which fit within bay widths to allow the hanging of garments. Rails can be re-positioned as required.
For more information speak to our shelving experts on the Free Helpline – 0800 169 5151
Request A Quote

Please leave this field empty.

Similar Products

×

×